Reduced Sample Preparation Time Research Articles

Analyzing the cellular plasma membrane by fast and efficient correlative STED and platinum replica EM

The plasma membrane of mammalian cells links transmembrane receptors, various structural components, and membrane-binding proteins to subcellular processes, allowing inter- and intracellular communication. Therefore, membrane-binding proteins, together with structural components such as actin filaments, modulate the cell membrane in their flexibility, stiffness, and curvature. Investigating membrane components and curvature in cells remains challenging due to the diffraction limit in light microscopy. Preparation of 5–15-nm-thin plasma membrane sheets and subsequent inspection by metal replica transmission electron microscopy (TEM) reveal detailed information about the cellular membrane topology, including the structure and curvature. However, electron microscopy cannot identify proteins associated with specific plasma membrane domains. Here, we describe a novel adaptation of correlative super-resolution light microscopy and platinum replica TEM (CLEM-PREM), allowing the analysis of plasma membrane sheets with respect to their structural details, curvature, and associated protein composition. We suggest a number of shortcuts and troubleshooting solutions to contemporary PREM protocols. Thus, implementation of super-resolution stimulated emission depletion (STED) microscopy offers significant reduction in sample preparation time and reduced technical challenges for imaging and analysis. Additionally, highly technical challenges associated with replica preparation and transfer on a TEM grid can be overcome by scanning electron microscopy (SEM) imaging. The combination of STED microscopy and platinum replica SEM or TEM provides the highest spatial resolution of plasma membrane proteins and their underlying membrane and is, therefore, a suitable method to study cellular events like endocytosis, membrane trafficking, or membrane tension adaptations.

A highly efficient strategy for simultaneous analysis of eleven monomeric hydroxylated-stilbenes in grape wines and juices by a salting-out assisted liquid-liquid (SALLE) extraction combined with a high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS).

Wine and grape juice are known to have hydroxylated stilbenes, a group of phytoalexins, health-promoting compounds. The determination of stilbene species in wine and grape juices remains a challenging task. Here, we propose an efficient strategy for the simultaneous determination of eleven hydroxylated stilbenes in grape wines and grape juice by a SALLE in conjunction with an HPLC-ESI-MS/MS. SALLE and HPLC-MS/MS conditions were optimized. The proposed method was validated and found to be a simple, sensitive, and reliable measure for the determination of the stilbene species in wine and grape juice. The SALLE was fast and efficient, taking only 10min. The HPLC-MS/MS was able to quickly separate and quantitate the eleven stilbenes (9min running). This method was successfully applied to determine the contents of stilbene species in commercial wine and grape juice in Korea. This method is advantageous in reduced sample preparation time, low labor, and cost efficiency.

Expanding the Analytical Toolbox: Developing New Lys-C Peptide Mapping Methods with Minimized Assay-Induced Artifacts to Fully Characterize Antibodies.

Peptide mapping is an important tool used to confirm that the correct sequence has been expressed for a protein and to evaluate protein post-translational modifications (PTMs) that may arise during the production, processing, or storage of protein drugs. Our new orally administered drug (Ab-1), a single-domain antibody, is highly stable and resistant to proteolysis. Analysis via the commonly used tryptic mapping method did not generate sufficient sequence coverage. Alternative methods were needed to study the Ab-1 drug substance (75 mg/mL) and drug product (3 mg/mL). To meet these analytical needs, we developed two new peptide mapping methods using lysyl endopeptidase (Lys-C) digestion. These newly developed protein digestion protocols do not require desalting/buffer-exchange steps, thereby reducing sample preparation time and improving method robustness. Additionally, the protein digestion is performed under neutral pH with methionine acting as a scavenger to minimize artifacts, such as deamidation and oxidation, which are induced during sample preparation. Further, the method for low-concentration samples performs comparably to the method for high-concentration samples. Both methods provide 100% sequence coverage for Ab-1, and, therefore, enable comprehensive characterization for its product quality attribute (PQA) assessment. Both methods can be used to study other antibody formats.

Dual metal electrolysis in theta capillary for lipid analysis

Increasing studies associating glycerophospholipids with various pathological conditions highlight the need for their thorough characterization. However, the intricate composition of the lipidome due to the presence of lipid isomers poses significant challenges to structural lipidomics. This study uses the anodic corrosion of two metals in a single theta nESI emitter as a tool to simultaneously characterize lipids at multiple isomer levels. Anodic corrosion of cobalt and copper in the positive ion mode generates the metal-adducted lipid complexes, [M+Co]2+ and [M+Cu]+, respectively. Optimization of parameters such as the distances of the electrodes from the nESI tip allowed the achievement of the formation of one metal-adducted lipid product at a time. Collision-induced dissociation (CID) of [M+Co]2+ results in preferential loss of the fatty acyl (FA) chain at the sn-2 position, thus generating singly charged sn-specific fragment ions. Whereas, multistage fragmentation of [M+Cu]+ via CID generated a CC bond position-specific characteristic ion pattern induced by the π-Cu+ interaction. The feasibility of the method was tested on PC lipid extract from egg yolk to identify lipids on multiple isomer levels. Thus, the application of dual metal anodic corrosion allows lipid isomer identification with reduced sample preparation time, no signal suppression by counter anions, low sample consumption, and no need for an extra apparatus.

Development and validation of a peptide-mapping procedure for a novel C1 esterase inhibitor

Peptide mapping is a key method for studying the primary structure of proteins. With its sensitivity to the slightest changes in the covalent structure of a protein, this method is applicable both to medicinal product identification at the control stage and to production process stability monitoring.The aim of the study was to develop and validate a peptide-mapping procedure for the identification of a novel highly glycosylated recombinant C1 esterase inhibitor.Materials and methods. The authors studied recombinant human C1 esterase inhibitor products and trypsin. The study involved peptide mapping using reverse-phase high-performance liquid chromatography and high-resolution mass spectrometry. The following statistics were calculated to evaluate the results: mean, standard deviation, and coefficient of variation. The validation parameters included specificity, precision, and robustness.Results. The authors tested several variants of sample preparation for tryptic digests, including additional N-glycanase treatment and complete deglycosylation, and established the optimal conditions for sample preparation and chromatographic separation of C1 esterase inhibitor peptides to obtain consistent chromatographic profiles (peptide maps). The authors identified characteristic peaks and the corresponding relative retention time and area ranges. The absolute retention time of the second (characteristic) peak was approximately 16.5–16.9 minutes. The relative retention times were 2.14–2.21 for peak 9, 2.55–2.64 for peak 12, 2.97–3.14 for peak 14, 3.11–3.29 for peak 15, and 6.20–6.63 for peak 28.Conclusions. The authors developed a peptide-mapping procedure for C1 esterase inhibitors and optimised the conditions to achieve an over 18-hour reduction in sample preparation time. This procedure met the established acceptance criteria for specificity, precision, and robustness.

Contaminated disposable rubber gloves as evidence samples after a chemical attack with nerve agents.

Nerve agents have been used recently in the Syrian civil war. Collecting relevant samples for retrospective identification of an attack is often problematic. The article deals with the possibility of using contaminated gloves as an analytical sample for evidence of the chemical weapons use. There have not yet been published studies dealing with the identification of chemical warfare agents in this type of matrix, where the diversity of chemical properties of gloves and the lifetime of the contaminated sample would be considered. Sarin, soman, and cyclosarin were used as contaminants in the study. Nitrile, latex, and vinyl disposable gloves were chosen as matrices. The identification method was gas chromatography. Six solvents commonly used in military laboratories were tested as extractants. The extraction procedure was optimized in terms of the appropriate method (vortex) and the required extraction time (1min) and resulted in significant reduction in sample preparation time. The chromatographic background of the extracts was also monitored in order to find a method with the least number of peaks interfering in the identification. Suitable solvents were hexane and acetonitrile. The lifetime of the sample was also investigated. The worst result was recorded for latex. For individual contaminants, the time varied depending on the volatility. The developed procedures were successfully validated within a sample handling effects scenario. The results demonstrate that in the event of an ongoing military risk at the site of an attack, even discarded disposable rubber glove type samples can be used as evidence.

Detection of Vegetable Oil Adulteration in Pre-Grated Bovine Hard Cheeses via 1H NMR Spectroscopy.

Adulteration of food products is a widespread problem of great concern to society and dairy products are no exception to this. Due to new methods of adulteration being devised in order to circumvent existing detection methods, new detection methods must be developed to counter fraud. Bovine hard cheeses such as Asiago, Parmesan, and Romano are widely sold and consumed in pre-grated form for convenience. Due to being processed products, there is ample opportunity for the introduction of inexpensive adulterants and as such, there is concern regarding the authenticity of these products. An analytical method was developed using a simple organic extraction to verify the authenticity of bovine hard cheese products by examining the lipid profile of these cheeses via proton Nuclear Magnetic Resonance (NMR) spectroscopy. In this study, 52 samples of pre-grated hard cheese were analyzed as a market survey and a significant number of these samples were found to be adulterated with vegetable oils. This method is well suited to high throughput analysis of these products and relies on ratiometrics of the lipids in the samples themselves. Genuine cheeses were found to have a very consistent lipid profile from sample to sample, improving the power of this approach to detect vegetable oil adulteration. The method is purely ratiometric with no need for internal or external references, reducing sample preparation time and reducing the potential for the introduction of error.

QuEChERS-based extraction and two-dimensional liquid chromatography-high resolution mass spectrometry for the determination of long chain chlorinated paraffins in sediments

In this study, a method was established for the analysis of long-chain chlorinated paraffins (LCCPs) in sediment based on quick, easy, cheap, effective, rugged, and safe (QuEChERS) extraction and two-dimensional liquid chromatography-Orbitrap high resolution mass spectrometry (2DLCOrbitrap HRMS). Compared with other reported methods, this method greatly reduces sample preparation time (2 h) and solvent consumption. The QuEChERS extraction method presented satisfactory recoveries, 90.5–95.2, 84.7–86.6, and 81.4–83.4% of 5, 50, and 200 ng/g LCCPs with 49% Cl spiked into sediments. Meanwhile, no matrix effects were found in the LCCPs analysis after online purification by the 2DLC system. With the current commercial LCCP standards and a mixture of three chlorinated paraffins (CPs) industrial products, a suspect screening strategy was established and accurate identification of LCCPs (including vLCCPs, which carbon chain length greater than 20) under the plight that the reference standards for vLCCPs are currently unavailable. A total of 21 C18–20-LCCP and 22 vLCCP congeners were identified in sediment samples collected from Dongting Lake, China. The total concentrations of LCCPs in six sediment samples ranged from 1.69 to 18.0 ng/g (median 6.66 ng/g) and was dominated by C18 groups (mean, 28.8%), C19 groups (mean, 19.1%) and C21 groups (mean, 16.9%). Taken together, the successful application of this method to analyze sediment samples shows great potential for the analysis of LCCPs in environmental samples in future studies.

Cellulose in Foliage and Changes during Seasonal Leaf Development of Broadleaf and Conifer Species.

Stable isotope approaches are widely applied in plant science and many improvements made in the field focus on the analysis of specific components of plant tissues. Although technical developments have been very beneficial, sample collection and preparation are still very time and labor-consuming. The main objective of this study was to create a qualitative dataset of alpha-cellulose content of leaf tissues of arboreal species. We extracted alpha-cellulose from twelve species: Abies alba Mill., Acer pseudoplatanus L., Fagus sylvatica L., Larix decidua Mill., Picea abies (L.) Karst., Pinus sylvestris L., Quercus cerris L., Quercus petrea (Matt.) Liebl., Quercus pubescens Wild., Quercus robur L., Tilia platyphyllos Scop. and Ulmus glabra Huds. While these species show an increase in cellulose yield from bud break to full leaf development, the rates of increase in cellulose content and the duration of the juvenile phase vary greatly. Moreover, the veins display significantly higher alpha-cellulose content (4 to 11%) compared to blade tissues, which reflects their different structural and biochemical functions. A guide for the mass of sample material required to yield sufficient alpha-cellulose for a standard stable isotope analysis is presented. The additional benefits of the assessment of the mass of required sample material are reduced sample preparation time and its usefulness in preparing samples of limited availability (e.g., herbarium material, fossil samples).

High throughput phenotyping of cross-sectional morphology to assess stalk lodging resistance

BackgroundStalk lodging (mechanical failure of plant stems during windstorms) leads to global yield losses in cereal crops estimated to range from 5% to 25% annually. The cross-sectional morphology of plant stalks is a key determinant of stalk lodging resistance. However, previously developed techniques for quantifying cross-sectional morphology of plant stalks are relatively low-throughput, expensive and often require specialized equipment and expertise. There is need for a simple and cost-effective technique to quantify plant traits related to stalk lodging resistance in a high-throughput manner.ResultsA new phenotyping methodology was developed and applied to a range of plant samples including, maize (Zea mays), sorghum (Sorghum bicolor), wheat (Triticum aestivum), poison hemlock (Conium maculatum), and Arabidopsis (Arabis thaliana). The major diameter, minor diameter, rind thickness and number of vascular bundles were quantified for each of these plant types. Linear correlation analyses demonstrated strong agreement between the newly developed method and more time-consuming manual techniques (R2 > 0.9). In addition, the new method was used to generate several specimen-specific finite element models of plant stalks. All the models compiled without issue and were successfully imported into finite element software for analysis. All the models demonstrated reasonable and stable solutions when subjected to realistic applied loads.ConclusionsA rapid, low-cost, and user-friendly phenotyping methodology was developed to quantify two-dimensional plant cross-sections. The methodology offers reduced sample preparation time and cost as compared to previously developed techniques. The new methodology employs a stereoscope and a semi-automated image processing algorithm. The algorithm can be used to produce specimen-specific, dimensionally accurate computational models (including finite element models) of plant stalks.

Rapid parallel generation of a fluorescently barcoded drop library from a microtiter plate using the plate-interfacing parallel encapsulation (PIPE) chip.

In drop-based microfluidics, an aqueous sample is partitioned into drops using individual pump sources that drive water and oil into a drop-making device. Parallelization of drop-making devices is necessary to achieve high-throughput screening of multiple experimental conditions, especially in time-sensitive studies. Here, we present the plate-interfacing parallel encapsulation (PIPE) chip, a microfluidic chip designed to generate 50 to 90 μm diameter drops of up to 96 different conditions in parallel by interfacing individual drop makers with a standard 384-well microtiter plate. The PIPE chip is used to generate two types of optically barcoded drop libraries consisting of two-color fluorescent particle combinations: a library of 24 microbead barcodes and a library of 192 quantum dot barcodes. Barcoded combinations in the drop libraries are rapidly measured within a microfluidic device using fluorescence detection and distinct barcoded populations in the fluorescence drop data are identified using DBSCAN data clustering. Signal analysis reveals that particle size defines the source of dominant noise present in the fluorescence intensity distributions of the barcoded drop populations, arising from Poisson loading for microbeads and shot noise for quantum dots. A barcoded population from a drop library is isolated using fluorescence-activated drop sorting, enabling downstream analysis of drop contents. The PIPE chip can improve multiplexed high-throughput assays by enabling simultaneous encapsulation of barcoded samples stored in a microtiter plate and reducing sample preparation time.

Novel resin tissue array system reduces sample preparation time, labour and reagent costs in bone tissue histology.

Resin histology plays an essential role in the analysis of hard tissues, such as bone and teeth, as well as in the context of metallic implant analysis. However, the techniques of resin embedding, followed by ground sectioning, are very costly due to significantly increased reagent cost and labour time when compared to the conventional paraffin histology approach. In the present study, a novel resin array system was developed to increase the affordability of a project analysing rat femur tissues containing metallic or polymeric implants. The resin array system enabled the simultaneous embedding of the femur samples in groups of eight samples compared to the conventional resin method where samples are processed individually. The ground sections produced with the resin array system allowed uniform ROI selection, ground section thickness, staining consistency, and histological analysis with Goldner's trichrome stain, offering a substantial opportunity for reproducible immunohistochemistry which is unable to be achieved when processing samples embedded individually. The application of this novel resin array system significantly reduced resource usage when compared to doing the same analysis on individual samples. A reduction of approximately 40% was achieved for both total labour time and total reagent cost through the use of the array system compared with individual embedding. This novel resin array system has widespread applicability to many bone, hard tissue, and metallic implant studies, offering substantial conservation of research funds and increased accessibility to advanced techniques for commercial partners due to more cost-effective sample preparation and more accurate, reproducible data.

A Fast and Efficient Ultrasound-Assisted Extraction of Tocopherols in Cow Milk Followed by HPLC Determination.

A fast HPLC method with fluorescence detector (FD) was developed for the determination of three tocopherols (TOCs) in milk samples from Modicana cattle breed. The ultrasound-assisted procedure was optimized for the extraction of TOCs prior to HPLC/FD analysis, reducing sample preparation time and allowing a fast quantification of α-tocopherol, δ-tocopherol and γ tocopherol. The optimized ultrasonic extraction combines an efficient and simple saponification at room temperature and a rapid HPLC quantification of TOCs in milk. The precision of the full analytical procedure was satisfactory and the recoveries at three spiked levels were between 95.3% and 87.8%. The linear correlations were evaluated (R2 > 0.99) and the relative standard deviation (RSD) values for intra-day and inter-day tests at three spiked levels were below 1% for the retention time and below 5.20% for the area at low level spiking. The proposed procedure, reducing the experimental complexity, allowed accurate extraction and detection of three TOCs in milk samples from Modicana cattle breed.

Determination of Free Solanesol Levels in Cigarette Filters by Liquid Chromatography-Mass Spectrometry.

Solanesol, a naturally occurring constituent of tobacco, has been utilized as a good marker for environmental tobacco smoke particulate and as a noninvasive predictor of mainstream cigarette smoke tar and nicotine intake under naturalistic smoking conditions. A fast and accurate method for measuring free solanesol to assess tobacco smoke exposure is highly desirable. We have developed and validated a new environmentally friendly, high-throughput method for measuring solanesol content in discarded cigarette filter butts. The solanesol deposited in the used filters can be correlated with mainstream smoke deliveries of nicotine and total particle matter to estimate constituent delivery to smokers. A portion of filter material is removed from cigarette butts after machine smoking, spiked with internal standard solution, extracted and quantitatively analyzed using reverse-phase liquid chromatography coupled to a triple-quadrupole mass spectrometer. The new method incorporates a 48-well plate format for automated sample preparation that reduces sample preparation time and solvent use and increases sample throughput 10-fold compared to our previous method. Accuracy and precision were evaluated by spiking known amounts of solanesol on both clean and smoked cigarette butts. Recoveries exceeded 93% at both low and high spiking levels. Linear solanesol calibration curves ranged from 1.9 to 367 µg/butt with a 0.05 µg/butt limit of detection.

Green Miniaturized Extraction and Microextraction of Polycyclic Aromatic Hydrocarbons from Foods and Beverages

Background: Polycyclic aromatic hydrocarbons (PAHs) are common environmental contaminants consisting of two or more fused benzene rings. PAHs can be introduced into foodstuffs through different ways, such as smoking, roasting and grilling for meat and fish, absorption from the environment for edible oils, chemical treatment of crops for plant-based products, or contamination through packaging during storage. Due to the low concentrations of PAHs in foodstuffs, a clean-up and preconcentration sample preparation technique is of high importance. Until recently, solid-phase and liquid-liquid extraction were the most popular sample preparation techniques for the extraction of PAHs from food matrices. However, due to the fundamental drawbacks of those extraction procedures, a plethora of novel methods, including micro-extraction techniques and miniaturized extraction techniques, have been developed. Moreover, a wide variety of novel adsorbent materials (e.g., metal-organic frameworks, carbon-based materials, etc.) have been synthesized and applied for PAHs’ extraction. Objective: This review aims to discuss recent advances in the extraction techniques of PAHs from food samples, utilizing novel sample preparation approaches and adsorbents. Conclusion: Compared with the traditional sample preparation techniques, the herein discussed green miniaturized extraction and microextraction techniques offer multiple benefits, including simplicity, reduced sample preparation time, as well as reduced consumption of organic solvents.

Using a 3-hydroxyflavone derivative as a fluorescent probe for the indirect determination of aminothiols separated by ion-pair HPLC.

Homocysteine, cysteine, cysteinyl-glycine, and glutathione are significant biological aminothiols (ATs) that are marker-molecules in Down syndrome, Alzheimer's disease, or have been implicated as risk factors in atherosclerosis and other vascular diseases, and therefore rapid determination of these molecules is desirable. After reduction of the disulfides, a widely used method utilizes derivatization with ammonium 7-fluorobenzo-2-oxa-1,3-diazole-4-sulfonate (SBD-F) as a fluorogenic probe prior to reversed-phase HPLC separation followed by fluorescence detection. The traditional HPLC determination of ATs is time consuming and economically expensive. We have developed an ion-pair HPLC method coupled with indirect fluorescence detection after post-column reaction with a 2,4-dinitrobenzenesulfonate derivative of a 3-hydroxyflavone. The accuracy, precision, post-column temperature and residence time, and limit-of-detection were evaluated. Sample throughput and reduced sample preparation time of over an hour for the existing methods to less than 20 minutes for the new method is also demonstrated. No statistical differences in HCy, Cys, or Cys-Gly determinations in plasma samples were observed between our method and the traditional HPLC method.

Выявление фальсификации говяжьих полуфабрикатов куриным фаршем механической обвалки на примере пельменей

Human nutrition is an important factor affecting human health. Counterfeiting is one of the most pressing problems in the market, which worries manufacturers, sellers and consumers. There are a variety of product counterfeiting: substitution of expensive food products for cheaper ones, manufacturing of products with low nutritional value, deterioration of the recipe and plagiarism of the brand. It is also necessary to observe the correct labeling of the product, as this enables the consumer to meet his requirements when choosing a product. This article presents the results of our own research revealing the falsification of semi-finished beef products with mechanically deboned minced chicken using the example of dumplings. In the analysis, four fatty acids were selected for the presence or absence of chicken fat in ground beef. The determination of fatty acids was carried out by gas chromatography. Gas chromatographic analysis is considered to be effective for identifying food products due to its high degree of sensitivity, speed and simplicity. Sample preparation stages included the use of sodium methoxide in methanol with a molar concentration of 2 mol/dm3. Gas chromatographic analysis was carried out on a flame ionization detector with a quartz capillary column. For simplicity, reduction of sample preparation time and better results, the samples were filtered under vacuum at atmospheric pressure, which significantly accelerated the filtration process. The analysis of the test sample was carried out in an automatic mode according to the specified program of the chromatograph. Myristic, palmitoleic, margaric, stearic, linoleic, and arachidic acids were chosen as “labels” of fatty acids. It has been shown that even an insignificant addition of one type of impurity of another to meat leads to a change in the fatty acid composition of the product.

Detection of carbohydrates in sea ice extracellular polymeric substances via solid-phase extraction and HPLC-ESI-MS/MS

Dissolved organic matter in sea ice is rich in extracellular polymeric substances (EPS) secreted by sea ice algae and bacteria. Carbohydrates are the most abundant component of EPS and they may contribute to the Fe-binding organic ligand pool, increasing the residence time of bioavailable Fe in the euphotic zone when sea ice melts. A new method for the determination of EPS in sea ice samples is presented, using Solid Phase Extraction (SPE) column for the extraction and the pre-concentration steps and HPLC-ESI-MS/MS for the separation and identification of the analytes. The method has been built up and optimized using composite samples obtained from pack-ice aliquots collected during the winter 2012 in the framework of the activities of Australian-led Sea Ice Physics and Ecosystem eXperiment-2 (SIPEX-2) voyage. The SPE allowed samples as small as 50 mL, also reducing sample preparation time, as well as removing the salt of the matrix. Nine EPS with a mass lower than 1500 Da were identified by HPLC-ESI-MS/MS, characterized by a different number of glucose residue units making up the polymeric chain. The total estimated concentration was 46 ppb (μg L−1), in agreement with spectrophotometric assay results.

Validation of an Enhanced Swift Analytical Method for the Determination of Bound and Free 3-chloropropane-1,2-Diol in Foodstuffs using Gas Chromatography–Tandem Mass Spectrometry

An enhanced swift indirect method for the determination of both free and bound 3-monochloropropane-1,2-diol has been established. The advantages include reduced sample preparation time (1 h instead of several hours), rapid triple quadrupole gas chromatography−mass spectrometry detection (12 min rather than 30 min in average) combined with amplified selectivity and sensitivity. The enhanced method has been entirely validated. The limits of quatification and detection were estimated and were found to be less than 2 and 0.5 µg/kg, respectively. The recoveries at different spiked levels ranged from 98 to 106%. The reproducibility (expressed as relative standard deviation) was less than 8% while measurement uncertainty was in the range of ±18%.

Nanowire facilitated transfer of sensitive TEM samples in a FIB

We introduce a facile approach to transfer thin films and other mechanically sensitive TEM samples inside a FIB with minimal introduction of stress and bending. The method is making use of a pre-synthetized flexible freestanding Ag nanowire attached to the tip of a typical tungsten micromanipulator inside the FIB. The main advantages of this approach are the significantly reduced stress-induced bending during transfer and attachment of the TEM sample, the very short time required to attach and cut the nanowire, the operation at very low dose and ion current, and only using the e-beam for Pt deposition during the transfer of sensitive TEM samples. This results in a reduced sample preparation time and reduced exposure to the ion beam or e-beam for Pt deposition during the sample preparation and thus also reduced contamination and beam damage. The method was applied to a number of thin films and different TEM samples in order to illustrate the advantageous benefits of the concept. In particular, the technique has been successfully tested for the transfer of a thin film onto a MEMS heating chip for in situ TEM experiments.